Categories

Arduino Uno R3 Black CH340 Board with MicroUSB connector

Arduino Uno R3 Black CH340 Board with MicroUSB connector
Product Code: TD-AUNOR3+
Availability: In Stock
Price: Rs. 555.00 Rs. 500.00
Qty:     - OR -   Add to Wish List
Add to Compare

 

Arduino Uno 328P MicroUSB Black

The Arduino Uno is a microcontroller board based on the ATmega328PU. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The advantages from our point of view are:

  • MicroUSB female jack and more suitable even your smartphone has the same.
  • Consistently designed with 5V. It is not to pay attention to 3V / 5V.
  • The board is easy to program via the USB interface. No complicated libraries or drivers.
  • Therefore, the bootloader comes out with 0.5 kB, unlike other bootloader requiring 2 kB. So there is more space for the application.
  • The processor can be removed from the base and replaced. We can thus provide better support, by sending an individually programmed module.
  • Low production costs and thus a favorable price for you.

Specifications:

  • Processor: ATmega328-P
  • Flash memory: 32 kB (of which 0.5 kB used as the boot loader)
  • SRAM: 2KB
  • EEPROM: 1 kB
  • Operating voltage: 7-12V
  • Digital I / O Pins: 14 (of which 6 can be configured as PWM)
  • Analog inputs: 6

Package Contents:

  • 1 x Arduino UNO R3 328 Board
  • 1 x 40-pin male header strip

USB Driver: Search for "CH341SER" and install it according to Operating System you are using.

*image shown is real.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

 

Arduino Uno 328P MicroUSB Black

The Arduino Uno is a microcontroller board based on the ATmega328PU. It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz ceramic resonator, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.

The advantages from our point of view are:

  • MicroUSB female jack and more suitable even your smartphone has the same.
  • Consistently designed with 5V. It is not to pay attention to 3V / 5V.
  • The board is easy to program via the USB interface. No complicated libraries or drivers.
  • Therefore, the bootloader comes out with 0.5 kB, unlike other bootloader requiring 2 kB. So there is more space for the application.
  • The processor can be removed from the base and replaced. We can thus provide better support, by sending an individually programmed module.
  • Low production costs and thus a favorable price for you.

Specifications:

  • Processor: ATmega328-P
  • Flash memory: 32 kB (of which 0.5 kB used as the boot loader)
  • SRAM: 2KB
  • EEPROM: 1 kB
  • Operating voltage: 7-12V
  • Digital I / O Pins: 14 (of which 6 can be configured as PWM)
  • Analog inputs: 6

Package Contents:

  • 1 x Arduino UNO R3 328 Board
  • 1 x 40-pin male header strip

USB Driver: Search for "CH341SER" and install it according to Operating System you are using.

*image shown is real.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2014-2017 TechDelivers.com. All Rights Reserved.