Categories

ENC28J60 LAN Ethernet Network Board Module

ENC28J60 LAN Ethernet Network Board Module
ENC28J60 LAN Ethernet Network Board Module
Product Code: TD-LAN
Availability: Out Of Stock
Price: Rs. 425.00 Rs. 399.00
Qty:     - OR -   Add to Wish List
Add to Compare

 

ENC28J60 LAN Ethernet Network Board Module for Arduino/AVR/51/LPC/STM32

Description:

The ENC28J60 is a stand-alone Ethernet controller with an industry standard Serial Peripheral Interface (SPI). It is designed to serve as an Ethernet network interface for any controller equipped with SPI.

Feature: 

  • IEEE 802.3 compatible Ethernet controller.
  • Integrated MAC and 10BASE-T PHY.
  • Receiver and collision squelch circuit.
  • Supports one 10BASE-T port with automatic.
  • polarity detection and correction.
  • Supports Full and Half-Duplex modes.
  • Programmable automatic re-transmit on collision.
  • Programmable padding and CRC generation.
  • Programmable automatic rejection of erroneous packets.
  • SPI™ Interface with speeds up to 10 Mb/s.

Applications:

  • Database data logging or queries.
  • Web servers for remote embedded devices.
  • Remote monitoring (data collection/diagnostics).
  • Control of remote devices.
  • Use of email by remote device.
  • Remote reprogramming of nonvolatile memory (FLASH).

Package Content:

  • 1 x  ENC28J60 LAN Ethernet Network Board Module

*Image shown is a representation only.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

 

ENC28J60 LAN Ethernet Network Board Module for Arduino/AVR/51/LPC/STM32

Description:

The ENC28J60 is a stand-alone Ethernet controller with an industry standard Serial Peripheral Interface (SPI). It is designed to serve as an Ethernet network interface for any controller equipped with SPI.

Feature: 

  • IEEE 802.3 compatible Ethernet controller.
  • Integrated MAC and 10BASE-T PHY.
  • Receiver and collision squelch circuit.
  • Supports one 10BASE-T port with automatic.
  • polarity detection and correction.
  • Supports Full and Half-Duplex modes.
  • Programmable automatic re-transmit on collision.
  • Programmable padding and CRC generation.
  • Programmable automatic rejection of erroneous packets.
  • SPI™ Interface with speeds up to 10 Mb/s.

Applications:

  • Database data logging or queries.
  • Web servers for remote embedded devices.
  • Remote monitoring (data collection/diagnostics).
  • Control of remote devices.
  • Use of email by remote device.
  • Remote reprogramming of nonvolatile memory (FLASH).

Package Content:

  • 1 x  ENC28J60 LAN Ethernet Network Board Module

*Image shown is a representation only.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2014-2018 TechDelivers.com. All Rights Reserved.