Categories

Arduino UNO R3 328 with Header Strip

Arduino UNO R3 328 with Header Strip
Product Code: TD-AUNOR3
Availability: Out Of Stock
Price: Rs. 545.00 Rs. 475.00
Qty:     - OR -   Add to Wish List
Add to Compare

 

Arduino UNO R3 328

Arduino Uno 328P Flash: 32KB

This Arduino Uno is a microprocessor board with the ATmega 328 P from the AVR family of Atmel. We have here opted for the P variant, so the board with the block that still has legs. The different variants of Arduino are essentially "power balance", but differ due to different "processor versions" in the detail and therefore must be treated differently. Due to the ease of handling in several respects we have here decided to offer this variant here in the shop.

The advantages from our point of view are:

  • Correct USB-B connector, so mechanically robust than the "mini / micro" jacks and more suitable for use in the workshop.
  • Consistently designed with 5V. It is not to pay attention to 3V / 5V.
  • The board is easy to program via the USB interface. No complicated libraries or drivers.
  • Therefore, the bootloader comes out with 0.5 kB, unlike other bootloader requiring 2 kB. So there is more space for the application.
  • The processor can be removed from the base and replaced. We can thus provide better support, by sending an individually programmed module.
  • Low production costs and thus a favorable price for you.

Specifications:

  • Processor: ATmega328-P
  • Flash memory: 32 kB (of which 0.5 kB used as the boot loader)
  • SRAM: 2KB
  • EEPROM: 1 kB
  • Operating voltage: 7-12V
  • Digital I / O Pins: 14 (of which 6 can be configured as PWM)
  • Analog inputs: 6

Package Contents:

  • 1 x Arduino UNO R3 328 Board
  • 1 x 40-pin male header strip

USB Driver: Search for "CH341SER" and install it according to Operating System you are using.

*image shown is real. USB cable is not included.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

 

Arduino UNO R3 328

Arduino Uno 328P Flash: 32KB

This Arduino Uno is a microprocessor board with the ATmega 328 P from the AVR family of Atmel. We have here opted for the P variant, so the board with the block that still has legs. The different variants of Arduino are essentially "power balance", but differ due to different "processor versions" in the detail and therefore must be treated differently. Due to the ease of handling in several respects we have here decided to offer this variant here in the shop.

The advantages from our point of view are:

  • Correct USB-B connector, so mechanically robust than the "mini / micro" jacks and more suitable for use in the workshop.
  • Consistently designed with 5V. It is not to pay attention to 3V / 5V.
  • The board is easy to program via the USB interface. No complicated libraries or drivers.
  • Therefore, the bootloader comes out with 0.5 kB, unlike other bootloader requiring 2 kB. So there is more space for the application.
  • The processor can be removed from the base and replaced. We can thus provide better support, by sending an individually programmed module.
  • Low production costs and thus a favorable price for you.

Specifications:

  • Processor: ATmega328-P
  • Flash memory: 32 kB (of which 0.5 kB used as the boot loader)
  • SRAM: 2KB
  • EEPROM: 1 kB
  • Operating voltage: 7-12V
  • Digital I / O Pins: 14 (of which 6 can be configured as PWM)
  • Analog inputs: 6

Package Contents:

  • 1 x Arduino UNO R3 328 Board
  • 1 x 40-pin male header strip

USB Driver: Search for "CH341SER" and install it according to Operating System you are using.

*image shown is real. USB cable is not included.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2014-2018 TechDelivers.com. All Rights Reserved.