Categories

PIC16F676 Flash 14-pin 1kB Microcontroller with ADC

PIC16F676 Flash 14-pin 1kB Microcontroller with ADC
Product Code: TD-PIC16F676
Availability: In Stock
Price: Rs. 80.00
Qty:     - OR -   Add to Wish List
Add to Compare

 

PIC16F676 - 14-pin Flash 1kB Microcontroller with ADC

Specifications

  • 14-pin Low Power Microcontroller
  • Flash Program Memory: 1024 bytes
  • EEPROM Data Memory: 128 bytes
  • SRAM Data Memory: 64 bytes
  • I/O Pins: 12
  • Timers: One 8-bit / One 16-bit
  • A/D Converter: 10-bit 8-Channel
  • Analog Comparator: 1
  • Internal Oscillator: 4MHz

Feature

  • High-Performance RISC CPU:
    • Only 35 Instructions to Learn:
      • All single-cycle instructions except branches
    • Operating Speed:
      • DC – 20 MHz oscillator/clock input
      • DC – 200 ns instruction cycle
    • Interrupt Capability
    • 8-level Deep Hardware Stack
    • Direct, Indirect and Relative Addressing modes
  • Special Microcontroller Features:
    • Precision Internal Oscillator:
      • Factory calibrated to ±1%
      • Software tunable
      • Two-Speed Start-Up mode
      • Crystal fail detect for critical applications
      • Clock mode switching during operation for power savings
    • Power-Saving Sleep mode
    • Wide Operating Voltage Range (2.0V-5.5V)
    • Industrial and Extended Temperature Range
    • Power-on Reset (POR)
    • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
    • Brown-out Reset (BOR) with Software Control Option
    • Enhanced Low-Current Watchdog Timer (WDT) with on-chip oscillator (software selectable nominal 268 seconds with full prescaler) with software enable
    • Multiplexed Master Clear with Weak Pull-up or Input Only Pin
    • Programmable Code Protection
    • High-Endurance Flash/EEPROM Cell:
      • 100,000 write Flash endurance
      • 1,000,000 write EEPROM endurance
      • Flash/Data EEPROM retention: > 40 years
  • Low-Power Features:
    • Standby Current:
      • 50 nA @ 2.0V, typical
    • Operating Current:
      • 11 μA @ 32 kHz, 2.0V, typical
      • 220 μA @ 4 MHz, 2.0V, typical
    • Watchdog Timer Current:
      • 1 μA @ 2.0V, typical
*Image shown is a representation only.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

 

PIC16F676 - 14-pin Flash 1kB Microcontroller with ADC

Specifications

  • 14-pin Low Power Microcontroller
  • Flash Program Memory: 1024 bytes
  • EEPROM Data Memory: 128 bytes
  • SRAM Data Memory: 64 bytes
  • I/O Pins: 12
  • Timers: One 8-bit / One 16-bit
  • A/D Converter: 10-bit 8-Channel
  • Analog Comparator: 1
  • Internal Oscillator: 4MHz

Feature

  • High-Performance RISC CPU:
    • Only 35 Instructions to Learn:
      • All single-cycle instructions except branches
    • Operating Speed:
      • DC – 20 MHz oscillator/clock input
      • DC – 200 ns instruction cycle
    • Interrupt Capability
    • 8-level Deep Hardware Stack
    • Direct, Indirect and Relative Addressing modes
  • Special Microcontroller Features:
    • Precision Internal Oscillator:
      • Factory calibrated to ±1%
      • Software tunable
      • Two-Speed Start-Up mode
      • Crystal fail detect for critical applications
      • Clock mode switching during operation for power savings
    • Power-Saving Sleep mode
    • Wide Operating Voltage Range (2.0V-5.5V)
    • Industrial and Extended Temperature Range
    • Power-on Reset (POR)
    • Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
    • Brown-out Reset (BOR) with Software Control Option
    • Enhanced Low-Current Watchdog Timer (WDT) with on-chip oscillator (software selectable nominal 268 seconds with full prescaler) with software enable
    • Multiplexed Master Clear with Weak Pull-up or Input Only Pin
    • Programmable Code Protection
    • High-Endurance Flash/EEPROM Cell:
      • 100,000 write Flash endurance
      • 1,000,000 write EEPROM endurance
      • Flash/Data EEPROM retention: > 40 years
  • Low-Power Features:
    • Standby Current:
      • 50 nA @ 2.0V, typical
    • Operating Current:
      • 11 μA @ 32 kHz, 2.0V, typical
      • 220 μA @ 4 MHz, 2.0V, typical
    • Watchdog Timer Current:
      • 1 μA @ 2.0V, typical
*Image shown is a representation only.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2014-2018 TechDelivers.com. All Rights Reserved.