Categories

PIC16F877A - Microcontroller with 8K Bytes Flash PDIP-40

PIC16F877A - Microcontroller with 8K Bytes Flash PDIP-40
Product Code: TD-PIC16F877
Availability: In Stock
Price: Rs. 180.00
Qty:     - OR -   Add to Wish List
Add to Compare

 

PIC16F877A - 40 pin Flash 8Kbyte - 4Mhz Microcontroller

Specifications

  • 40-pin Low Power Microcontroller
  • Flash Program Memory: 8192 bytes
  • EEPROM Data Memory: 256 bytes
  • SRAM Data Memory: 368 bytes
  • I/O Pins: 33
  • Timers: Two 8-bit / One 16-bit
  • A/D Converter: 10-bit Eight Channel
  • PWM: Two 10-bit Modules
  • SSP: SPI and I²C Support
  • USART: Yes
  • External Oscillator: up to 20MHz
 
Feature
  • Special Microcontroller Features
    • 100,000 erase/write cycle Enhanced Flash Program Memory Typical
    • Self-reprogrammable under software control
    • Single-supply 5V In-Circuit Serial Programming
    • Watchdog Timer (WDT) with its own on-chip RC oscillator
    • Programmable Code Protection
    • Power-Saving Sleeping Mode
  •  Peripheral Features
    • Two 8-bit (TMR0, TMR2)timer/counter with Prescalar
    • One 16-bit timer/counter
    • Brown-out detection circuitry
    • Parallel Slave Port (PSP): 40/44 pin-device only
  •  High-Performance RISC CPU
    •  Only 35 single-word instructions to learn
    •  DC-20MHz clock input
    •  Up to 8K x 14 words of Flash Program Memory
    •  Pinout Compatible to other 28-pin or 40/44-pin
  •  Analog Features
    • 10-bit, up to 8-channel Analog-to-Digital Converter (A/D)
    • Brown-out Reset(BOR)
    • Two Analog Comparators
    • Programmable on-chip voltage reference (VREF) module
  •  CMOS Technology
    • Low-power, high-speed Flash/EEPROM technology
    • Fully Static Design
    • Wide Operating Voltage Range (2.0V to 5.5V)
    • Low-power Consumption
*Image shown is a representation only.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

 

PIC16F877A - 40 pin Flash 8Kbyte - 4Mhz Microcontroller

Specifications

  • 40-pin Low Power Microcontroller
  • Flash Program Memory: 8192 bytes
  • EEPROM Data Memory: 256 bytes
  • SRAM Data Memory: 368 bytes
  • I/O Pins: 33
  • Timers: Two 8-bit / One 16-bit
  • A/D Converter: 10-bit Eight Channel
  • PWM: Two 10-bit Modules
  • SSP: SPI and I²C Support
  • USART: Yes
  • External Oscillator: up to 20MHz
 
Feature
  • Special Microcontroller Features
    • 100,000 erase/write cycle Enhanced Flash Program Memory Typical
    • Self-reprogrammable under software control
    • Single-supply 5V In-Circuit Serial Programming
    • Watchdog Timer (WDT) with its own on-chip RC oscillator
    • Programmable Code Protection
    • Power-Saving Sleeping Mode
  •  Peripheral Features
    • Two 8-bit (TMR0, TMR2)timer/counter with Prescalar
    • One 16-bit timer/counter
    • Brown-out detection circuitry
    • Parallel Slave Port (PSP): 40/44 pin-device only
  •  High-Performance RISC CPU
    •  Only 35 single-word instructions to learn
    •  DC-20MHz clock input
    •  Up to 8K x 14 words of Flash Program Memory
    •  Pinout Compatible to other 28-pin or 40/44-pin
  •  Analog Features
    • 10-bit, up to 8-channel Analog-to-Digital Converter (A/D)
    • Brown-out Reset(BOR)
    • Two Analog Comparators
    • Programmable on-chip voltage reference (VREF) module
  •  CMOS Technology
    • Low-power, high-speed Flash/EEPROM technology
    • Fully Static Design
    • Wide Operating Voltage Range (2.0V to 5.5V)
    • Low-power Consumption
*Image shown is a representation only.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2014-2018 TechDelivers.com. All Rights Reserved.