Categories

Atiny2313 - 8-bit Microcontroller with 2K Bytes Flash - 20pin

Atiny2313 - 8-bit Microcontroller with 2K Bytes Flash - 20pin
Product Code: TD-AT2313
Availability: In Stock
Price: Rs. 150.00
Qty:     - OR -   Add to Wish List
Add to Compare

 

Atiny2313 - 8-bit Microcontroller with 2K Bytes Flash - 20pin

Features
  • Utilizes the AVR® RISC Architecture
  • High-performance, Low-power AVR 8-bit Microcontroller
  • Advanced RISC Architecture
    • 120 Powerful Instructions - Most Single Clock Cycle Execution
    • 32 x 8 General Purpose Working Registers
    • Up to 20 MIPS Throughput at 20MHz
    • Fully Static Operation
  • Nonvolatile Program and Data Memories
    • 2K Bytes of In-System Self Programmable Flash
      • Endurance 10,000 Write/Erase Cycles
    • 128 Bytes In-System Programmable EEPROM
      • Endurance: 100,000 Write/Erase Cycles
    • 128 Bytes Internal SRAM
    • Programming Lock for Flash Program and EEPROM Data Security
  • Peripheral Features
    • One 8-bit Timer/Counter with Separate Prescaler and Compare Mode
    • One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture Modes
    • Four PWM Channels
    • On-chip Analog Comparator
    • Programmable Watchdog Timer with On-chip Oscillator
    • USI – Universal Serial Interface
    • Full Duplex USART
  • Special Mircocontroller Features
    • debugWIRE On-chip Debugging
    • In-System Programmable via SPI Port
    • External and Internal Interrupt Sources
    • Low-power Idle, Power-down, and Standby Modes
    • Enhanced Power-on Reset Circuit
    • Programmable Brown-out Detection Circuit
    • Internal Calibrated Oscillator
  • I/O and Packages
    • 18 Programmable I/O Lines
    • 20-pin PDIP, 20-pin SOIC, 20-pad QFN/MLF
  • Operating Voltages
    • 1.8 – 5.5V (ATtiny2313V)
    • 2.7 – 5.5V (ATtiny2313)
  • Speed Grades
    • ATtiny2313V: 0 – 4 MHz @ 1.8 - 5.5V, 0 – 10 MHz @ 2.7 – 5.5V
    • ATtiny2313: 0 – 10 MHz @ 2.7 - 5.5V, 0 – 20 MHz @ 4.5 – 5.5V
  • Power Consumption at 1 Mhz, 1.8V, 25 °C
    • Active Mode
      1 MHz, 1.8V: 230 μA
      32 kHz, 1.8V: 20 μA (including oscillator)
    • Power-down Mode
      < 0.1 μA at 1.8VA

*Image shown is a representation only.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

 

Atiny2313 - 8-bit Microcontroller with 2K Bytes Flash - 20pin

Features
  • Utilizes the AVR® RISC Architecture
  • High-performance, Low-power AVR 8-bit Microcontroller
  • Advanced RISC Architecture
    • 120 Powerful Instructions - Most Single Clock Cycle Execution
    • 32 x 8 General Purpose Working Registers
    • Up to 20 MIPS Throughput at 20MHz
    • Fully Static Operation
  • Nonvolatile Program and Data Memories
    • 2K Bytes of In-System Self Programmable Flash
      • Endurance 10,000 Write/Erase Cycles
    • 128 Bytes In-System Programmable EEPROM
      • Endurance: 100,000 Write/Erase Cycles
    • 128 Bytes Internal SRAM
    • Programming Lock for Flash Program and EEPROM Data Security
  • Peripheral Features
    • One 8-bit Timer/Counter with Separate Prescaler and Compare Mode
    • One 16-bit Timer/Counter with Separate Prescaler, Compare and Capture Modes
    • Four PWM Channels
    • On-chip Analog Comparator
    • Programmable Watchdog Timer with On-chip Oscillator
    • USI – Universal Serial Interface
    • Full Duplex USART
  • Special Mircocontroller Features
    • debugWIRE On-chip Debugging
    • In-System Programmable via SPI Port
    • External and Internal Interrupt Sources
    • Low-power Idle, Power-down, and Standby Modes
    • Enhanced Power-on Reset Circuit
    • Programmable Brown-out Detection Circuit
    • Internal Calibrated Oscillator
  • I/O and Packages
    • 18 Programmable I/O Lines
    • 20-pin PDIP, 20-pin SOIC, 20-pad QFN/MLF
  • Operating Voltages
    • 1.8 – 5.5V (ATtiny2313V)
    • 2.7 – 5.5V (ATtiny2313)
  • Speed Grades
    • ATtiny2313V: 0 – 4 MHz @ 1.8 - 5.5V, 0 – 10 MHz @ 2.7 – 5.5V
    • ATtiny2313: 0 – 10 MHz @ 2.7 - 5.5V, 0 – 20 MHz @ 4.5 – 5.5V
  • Power Consumption at 1 Mhz, 1.8V, 25 °C
    • Active Mode
      1 MHz, 1.8V: 230 μA
      32 kHz, 1.8V: 20 μA (including oscillator)
    • Power-down Mode
      < 0.1 μA at 1.8VA

*Image shown is a representation only.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2014-2018 TechDelivers.com. All Rights Reserved.