Categories

LM311 - Voltage Comparator

LM311 - Voltage Comparator
Product Code: TD-OP311
Availability: In Stock
Price: Rs. 20.00
Qty:     - OR -   Add to Wish List
Add to Compare

 

LM311 - Voltage Comparator

General Description:
 
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50mA.
 
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM311 has the same pin configuration as the LM106 and LM710.

 

Features:

  • High Speed Comparator with Low Input Current
  • Single and Dual Supply Operation
  • Input Offset Voltage: 0.7 mV
  • Input Offset Current: 4 pA
  • Input Bias Current: 60 pA
  • Supply Current: 5.1 mA
* Image shown is a representation only

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

 

LM311 - Voltage Comparator

General Description:
 
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15V op amp supplies down to the single 5V supply used for IC logic. Their output is compatible with RTL, DTL and TTL as well as MOS circuits. Further, they can drive lamps or relays, switching voltages up to 50V at currents as high as 50mA.
 
Both the inputs and the outputs of the LM111, LM211 or the LM311 can be isolated from system ground, and the output can drive loads referred to ground, the positive supply or the negative supply. Offset balancing and strobe capability are provided and outputs can be wire OR’ed. Although slower than the LM106 and LM710 (200 ns response time vs 40 ns) the devices are also much less prone to spurious oscillations. The LM311 has the same pin configuration as the LM106 and LM710.

 

Features:

  • High Speed Comparator with Low Input Current
  • Single and Dual Supply Operation
  • Input Offset Voltage: 0.7 mV
  • Input Offset Current: 4 pA
  • Input Bias Current: 60 pA
  • Supply Current: 5.1 mA
* Image shown is a representation only

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2014-2018 TechDelivers.com. All Rights Reserved.