Categories

Micro USB 18650 Lithium Battery Charging Board Charger Module+Protection Dual Functions

Micro USB 18650 Lithium Battery Charging Board Charger Module+Protection Dual Functions
Micro USB 18650 Lithium Battery Charging Board Charger Module+Protection Dual Functions
Product Code: TD-CHRG2
Availability: In Stock
Price: Rs. 165.00 Rs. 120.00
Qty:     - OR -   Add to Wish List
Add to Compare

 

Micro USB 18650 Lithium Battery Charging Board Charger Module+Protection Dual Functions

USB Lithium Battery Charging Board

Charger Module 5V 1A

Micro USB input terminal with a female, can be directly input with the phone charger rechargeable lithium battery. And still retains the input voltage wiring pads, can be very convenient DIY. It can be used for voltage 3.6 3.7V, etc. 18650, polymer and other lithium battery charge and discharge protection. Support charge discharge over current protection; Supports simultaneous charging and discharging;Charge cutoff voltage: DC4.2V±1%;Charging mode: linear charge;Working environment temperature: -20-85 degrees Celsius

Description:

  • Charge module- Linear charging
  • Current- 1A adjustable
  • Charge precision- 1.5%
  • Input voltage- 4.5V-5.5V
  • Full charge voltage- 4.2V
  • Led indicator- red is charging blue is full charged
  • Input interface- Micro USB (general phone charger pin)
  • Work temperature- -10° to +85°
  • Inversed polarity- NO
  • Size- small 

NOTE:

  • Ampere meter can only be connected to 5v input end of the module
  • It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough
  • The connection wire should not be too thick
  • Make sure the connect point is good
  • If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip
  • NO Reveral polarit

Package includes:

  •  Board Charger Module  x   1

* Images shown is a representation only.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

 

Micro USB 18650 Lithium Battery Charging Board Charger Module+Protection Dual Functions

USB Lithium Battery Charging Board

Charger Module 5V 1A

Micro USB input terminal with a female, can be directly input with the phone charger rechargeable lithium battery. And still retains the input voltage wiring pads, can be very convenient DIY. It can be used for voltage 3.6 3.7V, etc. 18650, polymer and other lithium battery charge and discharge protection. Support charge discharge over current protection; Supports simultaneous charging and discharging;Charge cutoff voltage: DC4.2V±1%;Charging mode: linear charge;Working environment temperature: -20-85 degrees Celsius

Description:

  • Charge module- Linear charging
  • Current- 1A adjustable
  • Charge precision- 1.5%
  • Input voltage- 4.5V-5.5V
  • Full charge voltage- 4.2V
  • Led indicator- red is charging blue is full charged
  • Input interface- Micro USB (general phone charger pin)
  • Work temperature- -10° to +85°
  • Inversed polarity- NO
  • Size- small 

NOTE:

  • Ampere meter can only be connected to 5v input end of the module
  • It is better that the charging current is 37% of the battery capacity. If you charge to the battery of 1000mAH, current of 400 is enough
  • The connection wire should not be too thick
  • Make sure the connect point is good
  • If the input voltage is too high, like 5.2v, the current will be less than 1000mA, it is normal. It is protection function, auto-substract the charging current to avoid burn damage to chip
  • NO Reveral polarit

Package includes:

  •  Board Charger Module  x   1

* Images shown is a representation only.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2014-2018 TechDelivers.com. All Rights Reserved.