Categories

ST-Link V2 Mini STM8 STM32 Simulator Downloader Programmer

ST-Link V2 Mini STM8 STM32 Simulator Downloader Programmer
Product Code: TD-USBSTM
Availability: In Stock
Price: Rs. 425.00 Rs. 385.00
Qty:     - OR -   Add to Wish List
Add to Compare

 

ST-Link V2 Mini STM8 STM32 Simulator Downloader Programmer

Description:

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. In addition to providing the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 2500 VRMS. STM8 applications use the USB full speed interface to communicate with STMicroelectronic’s ST Visual Develop (STVD) or ST Visual Program (STVP) software. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments. Comes with one USB stick and a couple pieces of female-female jumpers. You may want to peruse our jumper selection if you need more or different sizes. We wired it up to an ST32F205 and ran ST-Link, and worked great! You can even update the firmware on the dongle as necessary, it has a DFU bootloader (we unplugged/replugged it from USB to kick off the DFU process
 

Features:

  • 5 V power supplied by a USB connector

  • USB 2.0 full speed compatible interface

  • Status LED which blinks during communication with the PC

Specifications:

  • USB stick dimensions: 54mm x 20mm x 9mm
  • Female to female wires inculded

Support:

  1. Support the full range of STM32 SWD debugging interface, a simple 4-wire interface (including power), fast, stable; interface definition housing directly marked! Do not need to read the manual;
  2. Support the full range of STM8 SWIM download debugging (common development environments such as IAR, STVD etc. are supported); supported software versions as follows:
  • ST-LINK Utility 2.0 and 4.2.1 above

  • STVD and above

  • STVP 3.2.3 and above

  • IAR EWARM V6.20 and above

  • IAR EWSTM8 V1.30 and above

  • KEIL RVMDK V4.21 and above

3. Support for automatic firmware upgrades to ensure follow-up support ST products. The factory firmware has been upgraded to the latest V2.J17.S4;
4. Increase the 5V power output, the output I / O ports are protected afraid of operational errors caused by ST-LINK V2 damage!
5. The interface easy to use copper gilded horns seat pitch of 2.54, with 20CM DuPont line, the line can respond to different target sequence, flexible wiring;
6. The use of U disk aluminum housing protects the motherboard, easy to carry, is not afraid of static electricity, afraid to fall throw touch.
7. With data package, containing: (e-file, disk, and network support Baidu QQ mailbox to send)

  • STLINK / V2 driver;
  • KEIL MDK (4.60) development environment (and other common development environments)
  • IAR STM8 (1401) development environment (and other common development environments)
  • STVD STM8 development environment (and other common development environments)
  • A number of classic STM32 information (including a large number of source code examples and video tutorials)
  • A number of classic STM8 information (including a large number of source code examples and learning experience)

Drivers Download:

  • https://www.dropbox.com/sh/0n9zergebkyezdk/AAB6z2FurjO3LlEFoitQNyr6a?dl=0

​Package Contents:

  • ​1 x STM Programmer
  • 4 x Female to Female Wire

*image shown is a representation only. Color may change depending on stock.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

 

ST-Link V2 Mini STM8 STM32 Simulator Downloader Programmer

Description:

The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families. The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board. In addition to providing the same functionalities as the ST-LINK/V2, the ST-LINK/V2-ISOL features digital isolation between the PC and the target application board. It also withstands voltages of up to 2500 VRMS. STM8 applications use the USB full speed interface to communicate with STMicroelectronic’s ST Visual Develop (STVD) or ST Visual Program (STVP) software. STM32 applications use the USB full speed interface to communicate with Atollic, IAR, Keil or TASKING integrated development environments. Comes with one USB stick and a couple pieces of female-female jumpers. You may want to peruse our jumper selection if you need more or different sizes. We wired it up to an ST32F205 and ran ST-Link, and worked great! You can even update the firmware on the dongle as necessary, it has a DFU bootloader (we unplugged/replugged it from USB to kick off the DFU process
 

Features:

  • 5 V power supplied by a USB connector

  • USB 2.0 full speed compatible interface

  • Status LED which blinks during communication with the PC

Specifications:

  • USB stick dimensions: 54mm x 20mm x 9mm
  • Female to female wires inculded

Support:

  1. Support the full range of STM32 SWD debugging interface, a simple 4-wire interface (including power), fast, stable; interface definition housing directly marked! Do not need to read the manual;
  2. Support the full range of STM8 SWIM download debugging (common development environments such as IAR, STVD etc. are supported); supported software versions as follows:
  • ST-LINK Utility 2.0 and 4.2.1 above

  • STVD and above

  • STVP 3.2.3 and above

  • IAR EWARM V6.20 and above

  • IAR EWSTM8 V1.30 and above

  • KEIL RVMDK V4.21 and above

3. Support for automatic firmware upgrades to ensure follow-up support ST products. The factory firmware has been upgraded to the latest V2.J17.S4;
4. Increase the 5V power output, the output I / O ports are protected afraid of operational errors caused by ST-LINK V2 damage!
5. The interface easy to use copper gilded horns seat pitch of 2.54, with 20CM DuPont line, the line can respond to different target sequence, flexible wiring;
6. The use of U disk aluminum housing protects the motherboard, easy to carry, is not afraid of static electricity, afraid to fall throw touch.
7. With data package, containing: (e-file, disk, and network support Baidu QQ mailbox to send)

  • STLINK / V2 driver;
  • KEIL MDK (4.60) development environment (and other common development environments)
  • IAR STM8 (1401) development environment (and other common development environments)
  • STVD STM8 development environment (and other common development environments)
  • A number of classic STM32 information (including a large number of source code examples and video tutorials)
  • A number of classic STM8 information (including a large number of source code examples and learning experience)

Drivers Download:

  • https://www.dropbox.com/sh/0n9zergebkyezdk/AAB6z2FurjO3LlEFoitQNyr6a?dl=0

​Package Contents:

  • ​1 x STM Programmer
  • 4 x Female to Female Wire

*image shown is a representation only. Color may change depending on stock.

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2014-2018 TechDelivers.com. All Rights Reserved.