Categories

NRF24L01 + 2.4GHz Antenna Wireless Transceiver Module for Arduino/8051/ARM

NRF24L01 + 2.4GHz Antenna Wireless Transceiver Module for Arduino/8051/ARM
NRF24L01 + 2.4GHz Antenna Wireless Transceiver Module for Arduino/8051/ARM
Product Code: TD-nRF24
Availability: In Stock
Price: Rs. 145.00 Rs. 99.00
Qty:     - OR -   Add to Wish List
Add to Compare

 

NRF24L01 + 2.4GHz Antenna Wireless Transceiver Module for Arduino/8051/ARM

Description:

Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, particularly suitable for industrial control applications 125 Channels, Multi-point communication and frequency hopping to meet the communication needs. Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. 
Built-in hardware CRC error detection, Multipoint communication address control Standard DIP Pitch Interface for embedded applications. 

Features:

  • MuitiCwiver hardware provides the function of six receivers
  • Link layer within makes the software design more simple
  • 2Mbit/s makes it possible for the high quality VoIP
  • 2Mbit/s 1Mbit/s 250Kbit/s three optional transmission rate
  • Few peripheral components make it possible for low cost
  • +/- 60 ppm crystals
  • Need external inductance only in antenna matching place
  • No need for multi layer PCB
  • 5V level input
  • No need for external level translator
  • Improved ShockBurst and UART are easy to connect with all kinds of low cost
  • MCU needs no external level
  • Peak current received at; 2Mbit/s is 12.5mA
  • Peak current of @0dBm output at; 2Mbit/s is 11mA 2Mbit/s needs small average current; Power consumption is 400mA in power down mode
  • Power consumption is 32uA in idle mode
  • Quick switch and wake-up time:130us
  • Voltage regulator within - Can work in low voltage between 1.9V to 3.6V
  • Reduce noise to its best.
  • Built-in 2.4GHz antenna

Package Content:

  • 1 x Wireless Transceiver Module For Microcontroller

Interface with Arduino: http://playground.arduino.cc/InterfacingWithHardware/Nrf24L01

*Image shown is a representation only.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Description

 

NRF24L01 + 2.4GHz Antenna Wireless Transceiver Module for Arduino/8051/ARM

Description:

Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, particularly suitable for industrial control applications 125 Channels, Multi-point communication and frequency hopping to meet the communication needs. Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient. 
Built-in hardware CRC error detection, Multipoint communication address control Standard DIP Pitch Interface for embedded applications. 

Features:

  • MuitiCwiver hardware provides the function of six receivers
  • Link layer within makes the software design more simple
  • 2Mbit/s makes it possible for the high quality VoIP
  • 2Mbit/s 1Mbit/s 250Kbit/s three optional transmission rate
  • Few peripheral components make it possible for low cost
  • +/- 60 ppm crystals
  • Need external inductance only in antenna matching place
  • No need for multi layer PCB
  • 5V level input
  • No need for external level translator
  • Improved ShockBurst and UART are easy to connect with all kinds of low cost
  • MCU needs no external level
  • Peak current received at; 2Mbit/s is 12.5mA
  • Peak current of @0dBm output at; 2Mbit/s is 11mA 2Mbit/s needs small average current; Power consumption is 400mA in power down mode
  • Power consumption is 32uA in idle mode
  • Quick switch and wake-up time:130us
  • Voltage regulator within - Can work in low voltage between 1.9V to 3.6V
  • Reduce noise to its best.
  • Built-in 2.4GHz antenna

Package Content:

  • 1 x Wireless Transceiver Module For Microcontroller

Interface with Arduino: http://playground.arduino.cc/InterfacingWithHardware/Nrf24L01

*Image shown is a representation only.

 

Write a review

Your Name:


Your Review: Note: HTML is not translated!

Rating: Bad           Good

Enter the code in the box below:



Copyright © 2014-2018 TechDelivers.com. All Rights Reserved.