-48 %
Model: TD-CNCA49
The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional coo..
₹ 120.00 ₹ 229.00
Model: TD-CNCV3
CNC shield v3 engraving machine 3D Printer + 4pcs A4988 driver expansion board
Engraver CNC Shield Board
Version:3.0
Color:Red
Size(L*W*H):68 x 53 x 18 mm
Voltage:DC 12~36 V (At the moment only the DRV8825 drivers can
Handle up to 36V so please consider the operation voltage when powerin..
₹ 799.00
Out Of Stock
Model: TD-RB8C12V
Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has eight (8) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals of higher quali..
₹ 299.00
Out Of Stock
Model: TD-RB8C5VS
Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has eight (8) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals of higher quali..
₹ 349.00
Model: TD-RB8C12V
Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has eight (8) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring u..
₹ 399.00
Out Of Stock
Model: TD-RB4C12V
Four Channel 4 Ch 12v Relay Board Module For Raspberry Pi Arduino AVR 8051
General description:
Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has four (4) on-board relay which ca..
₹ 180.00
Model: TD-RB4C6V
Four Channel 4 Ch 6v Relay Board Module For Raspberry Pi Arduino AVR 8051
General description:
Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has four (4) on-board relay which can switch u..
₹ 200.00
-45 %
Model: TD-L293M.S
Motor Driver – L293D Driver Module is a medium power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L293 motor driver IC. It can drive 4 DC motors on and off, or drive 2 DC motors with directional and speed control
The driver greatly simplifies and increases th..
₹ 99.00 ₹ 180.00
-33 %
Model: TD-L293M.B
L293D Motor Driver Shield For Arduino UNO
Description:
This is a motor shield for an Arduino Uno that makes it easy for your Arduino to control various types of motors! All you need to do is attach this to your Uno, run wires from your motors to the respective terminal blocks, and supply some ..
₹ 199.00 ₹ 299.00
-52 %
Model: TD-L298M
Arduino and most of the other microcontroller boards works on 5V DC power supply and the maximum current that can be drawn from Arduino ATMEGA328P pins is just 40mA. To control large 12V brushed DC motors you need some kind of motor driver. The L298N Dual H-Bridge Motor Driver is a great value and c..
₹ 145.00 ₹ 299.00
Showing 1 to 10 of 10 (1 Pages)