ICs

 74LS165 - 8-Bit Parallel In/Serial Out Shift RegisterDescriptionThis 8-bit serial shift register shifts data from QA to QH when clocked. Parallel inputs to each stage are enabled by a low level at the Shift/Load input. Also included is a gated clock input and a complementary output from ..

 74LS240 - Octal Buffers & Line DriversGeneral description:These octal buffer & line driver are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receiversand transmitters. The designer ha..

 74LS244 - Octal Buffers & Line Drivers Equivalent substitute - 74HC244General description:These buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/ drivers employed as memory-address drivers, clock drivers, and bus-oriente..

 74LS245 - Octal Bus Transmitter/Receiver (74F245)General description:The SN74LS245 is an Octal Bus Transmitter/Receiver designed for 8-line asynchronous 2-way data communication between data buses. Direction Input (DR) controls transmission of Data from bus A to bus B or b..

 74LS47 - BCD to 7-Segment Decoder/DriverDescription:The 74LS47 are Low Power Schottky BCD to 7-Segment Decoder/Drivers consisting of NAND gates, input buffers and seven AND-OR-INVERT gates. They offer active LOW, high sink current outputs for driving indicators directly. Seven ..

 74LS73 - Dual JK flip-flop with reset; negative-edge triggerEquivalent substitute - 74HC73Description:The SN54LS/74LS73A offers individual J, K, clear, and clock inputs. These dual flip-flops are designed so that when the clock goes HIGH, the inputs are enabled and data will ..

 74LS93 - 4 Bit Ripple CounterDescription:High speed 4-bit ripple type counters partitioned into two section and either a divide-by-eight (LS93)Category Integrated Circuits (ICs)Name 74LS93 - 4 Bit Ripple CounterFamily CMOSSeries 74xxxMounting Type Through HoleNo...

 74LS96 - 5 Bit Shift RegisterDescription:These shift registers consist of five R-S master slave flip-flops connected to perform parallel to serial or serial to parallel conversion of binary data.Category Integrated Circuits (ICs)Name 74LS96 - 5 Bit Shift RegisterFamily CMOS..

The ADC0804 is a classic 8‑bit analog‑to‑digital converter (ADC) designed for microcontroller and embedded system applications. It converts analog input signals into an 8‑bit digital output, making it ideal for interfacing sensors, instrumentation, and control systems. With its successive approxim..

The ADC0808CCN is an 8‑bit analog‑to‑digital converter (ADC) with an integrated 8‑channel multiplexer, designed for microcontroller and embedded system applications. It allows direct interfacing of multiple analog sensors to digital systems, converting analog signals into 8‑bit digital outputs. Wit..

The ADC0809CCN is an 8‑bit analog‑to‑digital converter (ADC) with an integrated 8‑channel multiplexer, designed for interfacing multiple analog signals with digital systems. It converts analog inputs into 8‑bit digital outputs using a successive approximation register (SAR) architecture, ensuring re..