CA3140 Bi-CMOS Operational-Amp (CA3140E Op-Amp)
Features:
MOSFET Input Stage
Very High Input Impedance
Very Low Input Current
Wide Common Mode Input Voltage Range - Can be Swung 0.5V Below Negative Supply Voltage Rail
Output Swing Complements Input Common Mode Ran..
LF398 - Monolithic Sample-and-Hold Circuits
General Description:
The LF198/LF298/LF398 are monolithic sample-and-hold circuits which utilize BI-FET technology to obtain ultra-high dc accuracy with fast acquisition of signal and low droop rate. Operating as a unity gain follo..
LM311 - Voltage Comparator
General Description:
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15..
The LM324 series consists of four independent, high gain,internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current..
LM339 - Low Power Quad Op-Amp
Advantages:
High precision comparators
Reduced VOS drift over temperature
Eliminates need for dual supplies
Allows sensing near GND
Compatible with all forms of logic
Power draisuitable for battery operation
Features:
Four Independent Comparators..
Low Power Dual Operational Amplifiers
The LM358 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also..
LM386 - Low Voltage Power Amplifier
Description:
The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 a..
LM393 - Low Power Low Offset Voltage Dual Comparators
Features:
Wide Supply
Voltage Range: 2.0V to 36V
Single or Dual Supplies: ±1.0V to ±18V
Very Low Supply Current Drain (0.4 mA)
Low Input Biasing Current: 25 nA
Low Input Offset Current: ±5 nA
Maximum Offset v..
The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439 and 748 in most applications.
The amplifiers offer many features which make their application ne..
OP07 - Ultralow Offset Voltage Operational Amplifier
Features:
Low VOS: 75 μV maximum
Low VOS drift: 1.3 μV/°C maximum
Ultrastable vs. time: 1.5 μV per month maximum
Low noise: 0.6 μV p-p maximum
Wide input voltage range: ±14 V typical
Wide supply voltage ran..
TL072 Low Noise JFET Dual Op-Amp
Features:
Low Power Consumption
Wide Common-Mode and Differential Voltage Ranges
Low Input Bias and Offset Currents
Output Short-Circuit Protection
Low Total Harmonic Distortion 0.003% Typ
Low Noise
Vn = 18 nV/√Hz Typ at f = 1 kHz
High Input Im..