Menu
Menu
Your Cart

TECHDELIVERS

Brand: TECHDELIVERS Model: TD-LM7805
The LM7805 monolithic 3-terminal positive voltage regulators employ internal current-limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 1.0A output current. They are intended as fixed voltage regu..
₹8.5
Add to Cart
Brand: TECHDELIVERS Model: TD-LM7809
The LM7809 monolithic 3-terminal positive voltage regulators employ internal current-limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 1.0A output current. They are intended as fixed voltage regu..
₹8.5
Add to Cart
Brand: TECHDELIVERS Model: TD-LM7812
The LM7812 is a monolithic 3-terminal regulator that provides a stable 12V output from a higher input voltage. It features internal current limiting, thermal shutdown, and safe-area compensation, making it highly reliable and essentially indestructible when properly heat-sinked. Key Features:Fixed..
₹12.0
Add to Cart
Brand: TECHDELIVERS Model: TD-LM78L05
The LM78L05 monolithic 3-terminal positive voltage regulators employ internal current-limiting, thermal shutdown and safe-area compensation, making them essentially indestructible. If adequate heat sinking is provided, they can deliver over 100mA output current. They are intended as fixed voltage re..
₹5.9
Add to Cart
Brand: TECHDELIVERS Model: TD-LM7909
The LM7909 (3-terminal regulators) is available with fixed output voltage of 9V. These devices need only one external component a compensation capacitor at the output. The LM79XX series is packaged in the TO-220 power package and is capable of supplying 1.5A of output current.   Thes..
₹17.0
Add to Cart
Brand: TECHDELIVERS Model: TD-LM7912
The LM7912 (3-terminal regulators) is available with fixed output voltage of -12V. These devices need only one external component a compensation capacitor at the output. The LM79XX series is packaged in the TO-220 power package and is capable of supplying 1.5A of output current.   These r..
₹17.0
Add to Cart
Brand: TECHDELIVERS Model: TD-LOAD10KG
This straight bar load cell (sometimes called a strain gauge) can translate up to 10 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar...
₹153.0 ₹249.0
Add to Cart
Brand: TECHDELIVERS Model: TD-LOAD3KG
This straight bar load cell (sometimes called a strain gauge) can translate up to 3 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar.W..
₹144.0 ₹249.0
Add to Cart
Brand: TECHDELIVERS Model: TD-LOAD50KG
The 50kg Half-bridge Experiments Body Scale Load Cell Sensor is measuring; the correct force is applied to the outer side of the strain E-shaped beam portion of the sensor (i.e., a strain gauge affixed to the intermediate, adhesive coating with white beam arms); and the outer edges to form a shear f..
₹51.0 ₹145.0
Add to Cart
Brand: TECHDELIVERS Model: TD-LOAD5KG
This straight bar load cell (sometimes called a strain gauge) can translate up to 5 kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to, and proportional of, the strain (e.g. pressure or force) applied to the bar.W..
₹148.0 ₹249.0
Add to Cart
Brand: TECHDELIVERS Model: TD-WASHER4
M6 Flat WasherWasher is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut.Washer (Metric Washer) also called as shim. Washers usually have an outer diameter (OD) about twice t..
₹2.5
Add to Cart
Brand: TECHDELIVERS Model: TD-WASHER3
M6 Flat WasherWasher is a thin plate (typically disk-shaped) with a hole (typically in the middle) that is normally used to distribute the load of a threaded fastener, such as a screw or nut.Washer (Metric Washer) also called as shim. Washers usually have an outer diameter (OD) about twice t..
₹2.5
Add to Cart
Showing 565 to 576 of 1194 (100 Pages)