74LS109 – Dual J-K Positive-edge-triggered Flip-Flops
Description:
This device contains two independent positive-edge-triggered J-K flip-flops with complementary outputs. The J and K data is accepted by the flip-flop on the rising edge of the clock pulse. The triggering occurs at a..
74LS125 - Quad 3 State Buffer
Features
Supply Voltage 7V
Input Voltage 7V
Operating Free Air Temperature Range 0°C to +70°C
Storage Temperature Range -65°C to +150°C
General Description
This device contains four independent gates each of which performs a non-inverting bu..
74LS13 - Dual 4-Input Schmitt Trigger
General Description
The SN54LS/74LS13 and SN54LS/74LS14 contain logic gates / inverters which accept standard TTL input signals and provide standard TTL output levels. They are capable of transforming slowly changing input signals into s..
74LS132 - Quad 2-Input Schmitt Trigger NAND Gate
General Description
The SN54/74LS132 contains four 2-Input NAND Gates which accept standard TTL input signals and provide standard TTL output levels. They are capable of transforming slowly changing input signals into sharply defin..
74LS138 - 1 of 8 Decoder De-Multiplexer
Features
Designed specifically for high speed:
Memory decoders
Data transmission systems
74LS138 3-to-8-line decoders incorporates 3 enable inputs to simplify cascading and/or data reception
Schottky clamped for high performance
General Description
Th..
The 74LS14 is a member of the 74LS family of integrated circuits (ICs) that were widely used in digital electronics. It specifically refers to the SN74LS14, which is a hex inverter with Schmitt trigger inputs. Here's some information about the 74LS14:Function: The 74LS14 contains six independent inv..
Each
of these 4-line-to-16-line decoders utilizes TTL circuitry to decode
four binary-coded inputs into one of sixteen mutually exclusive outputs
when both the strobe inputs, G1 and G2, are LOW. The de-multiplexing
function is performed by using the 4 input lines to address the output
line, pas..
74LS165 - 8-Bit Parallel In/Serial Out Shift Register
Description
This 8-bit serial shift register shifts data from QA to QH when clocked. Parallel inputs to each stage are enabled by a
low level at the Shift/Load input. Also included is a gated clock input and a complementary output from ..
The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439 and 748 in most applications.
The amplifiers offer many features which make their application ne..