74LS240 - Octal Buffers & Line Drivers
General description:
These octal buffer & line driver are designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receiversand transmitters. The designer ha..
74LS244 - Octal Buffers & Line Drivers
Equivalent substitute - 74HC244
General description:
These buffers/line drivers are designed to improve both the performance and PC board density of 3-STATE buffers/ drivers employed as memory-address drivers, clock drivers, and bus-oriente..
74LS47 - BCD to 7-Segment Decoder/Driver
Description:
The 74LS47 are Low Power Schottky BCD to 7-Segment Decoder/Drivers consisting of NAND gates, input buffers and seven AND-OR-INVERT gates. They offer active LOW, high sink current outputs for driving indicators directly. Seven ..
The Uno R3 CH340G ATmega328p Development Board is the low-cost version of the popular Uno R3 Arduino. It is assembled with the CH340 USB to Serial converter chip, instead of using an Atmega16U2 chip.We have used plenty of these low-cost Arduino boards with CH340 chips and have found them to work per..
CD4511 - BCD to 7-segment Latch/Decoder/Driver
Category
Integrated Circuits (ICs)
Name
CD4511, BCD to 7-segment Latch/Decoder/Driver
Family
CMOS
Series
4000
Mounting Type
Through Hole
No. of Pins
14 (DIP)
Features:
Contains a 4-bit Storage Latch, BCD-to-Seven..
CD4543 - BCD to 7 segment Latch/Decoder/Driver for LCD's
Category
Integrated Circuits (ICs)
Name
CD4543
Family
Bilateral switch
Series
4000B
Mounting Type
Through Hole
No. of Pins
16
Features:
Display blinking of illegel input combination
Latch sto..
CNC shield v3 engraving machine 3D Printer + 4pcs A4988 driver expansion board
Engraver CNC Shield Board
Version:3.0
Color:Red
Size(L*W*H):68 x 53 x 18 mm
Voltage:DC 12~36 V (At the moment only the DRV8825 drivers can
Handle up to 36V so please consider the operation voltage when powerin..
Screwdriver / Line Tester is a multipurpose product that works great as a screwdriver as well as a line tester. The useful and appreciable tool is a must have in your toolset. If you prefer to do your own hardware tasks then this is a must have product for you. It will help you check if there is ele..
A metal–oxide–semiconductor field-effect transistor (MOSFET) is a field-effect transistor where the voltage determines the conductivity of the device. It is used for switching or amplifying signals. The ability to change conductivity with the amount of applied voltage can be used for amplifying or s..
A metal–oxide–semiconductor field-effect transistor (MOSFET) is a field-effect transistor where the voltage determines the conductivity of the device. It is used for switching or amplifying signals. The ability to change conductivity with the amount of applied voltage can be used for amplifying or s..
L293D - H-Bridge Motor Driver
PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES
The L293D is assembled in a 16 lead plastic package which has 4 center pins connected together and used for heatsinking.
The Device is a monolithic integrated high voltage, high current four channel ..
L293D Motor Driver module is compatible with ESP12E Dev Kit and NodeMCU CP2102. This shield board is driven by the power full-bridge chip L293DD which can directly drive 2-channels DC motors or one-channel stepper motor.In this motor shield board, the IO port of ESP-12E Dev Kit is used as the ..