OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays ..
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays ..
OLED (Organic Light-Emitting Diode) is a self light-emitting technology composed of a thin, multi-layered organic film placed between an anode and cathode. In contrast to LCD technology, OLED does not require a backlight. OLED possesses high application potential for virtually all types of displays ..
This is a 1.3 inch BLUE OLED display module. The display module can be interfaced with any micro-controller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes display board, 4 pin male header.OLED (Organic Light-Emitting Diode) is a self light-emitting technology comp..
This is a 1.3 inch WHITE OLED display module. The display module can be interfaced with any micro-controller using SPI/IIC protocols. It is having a resolution of 128×64. The package includes display board, 4 pin male header.OLED (Organic Light-Emitting Diode) is a self light-emitting technology com..
2.4" TFT LCD Shield + Touch Panel Display with TF w/TF Reader for Arduino UNO R3
Arduino LCD display shield with built in microSD card connection. This TFT display is big (2.4″ diagonal) bright (4 white-LED backlight) and colorful (18-bit 262,000 different shades)! 240&tim..
The AC 220V Dual Charger you are referring to is a charging device that can charge multiple types of Li-ion batteries, including 18650, AA, AAA, 17650, 16340, 14500, and 10500 batteries.The charger is designed to work with a standard AC 220V power source, so you will need to plug it into a wall outl..
The AC 220V Single Charger you are referring to is a charging device that can charge multiple types of Li-ion batteries, including 18650, AA, AAA, 17650, 16340, 14500, and 10500 batteries.The charger is designed to work with a standard AC 220V power source, so you will need to plug it into a wall ou..
CD4543 - BCD to 7 segment Latch/Decoder/Driver for LCD's
Category
Integrated Circuits (ICs)
Name
CD4543
Family
Bilateral switch
Series
4000B
Mounting Type
Through Hole
No. of Pins
16
Features:
Display blinking of illegel input combination
Latch sto..
Heart Rate data can be used in many Electronic design and micro-controller projects. But the heart rate data is difficult to read, however, the Pulse Sensor Amped help us to read heart rate. The Heart Beat Pulse Sensor Amped is a plug-and-play heart-rate sensor for Arduino.It can be used by students..
IIC/I2C Interface Adapter Module is used for 16×2 LCD Display. It uses the PCF8574T IC chip which converts I2C serial data to parallel data for the LCD display. Also this interface module simplifies connecting an Arduino to a 16×2 Liquid Crystal display using only 4 wires.Features:Serial I2C control..
16x2 LCD display is an alphanumeric display. It is based on the HD44780 display controller, and ready to interface with most micro-controllers.It works on 5V and has a Green Backlight which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltag..