74HC27 / 74HCT27 - Triple 3-input NOR gate
The 74HC27; 74HCT27 is a triple 3-input NOR gate. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC.
Category
Integrated Circuits (ICs)
Name
74HC27 / 74H..
74HC32 / 74HCT32 - Quad 2-input OR Gate
Description
This device contains three independent gates each of which performs the logic OR function.
Category
Integrated Circuits (ICs)
Name
74HC32 / 74HCT32 - Quad 2-input OR Gate
Family
CMOS
Series
74xxx
Mou..
74HC573 - Octal D-type transparent latch
Description
The 74HC/HCT573 are high-speed Si-gate CMOS devices and are pin compatible with low power Schottky TTL (LSTTL). They are specified in compliance with JEDEC standard no. 7A. The 74HC/HCT573 are octal D-type transparent latches featuring s..
The 74HC86 exclusive OR gate utilizes advanced silicon-gate CMOS technology to achieve operating speeds similar to equivalent LS-TTL gates while maintaining the low power consumption and high noise immunity characteritic of standard CMOS integrated circuits. These gates are fully buffered and have a..
CD4001 - Quad 2 Input NOR Gate
Specifications:
Category
Integrated Circuits (ICs)
Name
CD4001
Family
Logic - Gates and Inverters
Series
4000B
Logic Type
NOR Gate
Number of Inputs
2
Number of Circuits
4
Mounting Type
Through Hole
Package / Case
14-SOIC (0.154", 3.90m..
CD4072 - Dual 4-Input OR Gate
Category
Integrated Circuits (ICs)
Name
CD4072 Dual 4-Input OR Gate
Family
Logic
Series
4000
Logic Type
Combinatorial
Mounting Type
Through Hole
No. of Pins
14
*Image shown is a representation only...
CD4078 - 8-Input NOR/OR Gate
Category
Integrated Circuits (ICs)
Name
CD4078 - 8-Input NOR/OR Gate
Family
Logic
Series
4000
Logic Type
Combinatorial
Mounting Type
Through Hole
No. of Pins
14
*Image shown is a representation only..
A metal–oxide–semiconductor field-effect transistor (MOSFET) is a field-effect transistor where the voltage determines the conductivity of the device. It is used for switching or amplifying signals. The ability to change conductivity with the amount of applied voltage can be used for amplifying or s..
A metal–oxide–semiconductor field-effect transistor (MOSFET) is a field-effect transistor where the voltage determines the conductivity of the device. It is used for switching or amplifying signals. The ability to change conductivity with the amount of applied voltage can be used for amplifying or s..