Search

The 12V 2000mAh 3-Cell Li-ion Rechargeable Battery Pack is a reliable and compact power source built with three high-quality lithium-ion cells in series. Delivering a nominal 12V output and 2000mAh capacity, it is perfect for powering robotics projects, Arduino-based systems, IoT devices, LED lighti..

The 30A SimonK ESC is a high-performance electronic speed controller designed for brushless DC motors used in drones, RC planes, and multirotors. Preloaded with SimonK firmware, it delivers ultra-fast throttle response and smooth motor control. Ideal for DIY kits, quadcopters, and robotics projects...

The A2212 1000KV Brushless Motor is a high-performance outrunner motor designed for multirotors, RC airplanes, and hovercrafts. With a solid metal casing and pre-soldered connectors, it offers reliable performance, smooth throttle response, and easy integration into your drone or DIY flying platform..

The A2212 1400KV Brushless Motor is a high-performance outrunner motor designed for multirotors, RC airplanes, and hovercrafts. With a solid metal casing and pre-soldered connectors, it offers reliable performance, smooth throttle response, and easy integration into your drone or DIY flying platform..

The A2212 2200KV BLDC Brushless DC Motor is a high‑performance motor designed for drones, quadcopters, and RC aircraft. With a KV rating of 2200, it delivers high RPM per volt, making it ideal for lightweight aerial vehicles requiring fast response and stable thrust. This version comes with pre‑sol..

The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional coo..

The 370 Mini DC Micro Motor Air Pump is a compact and efficient pump designed for aquarium aeration, DIY electronics, and small pneumatic projects. Powered by a DC motor, it delivers steady airflow for oxygenation, suction, or lightweight pneumatic applications. Its portable size and durable constr..

The Armature for Marathon SDE‑H37L1 (35,000 RPM) is a replacement spare part designed specifically for the Marathon H37L1 micromotor handpiece. This high‑precision armature ensures smooth rotation, reliable performance, and long service life for dental labs, clinics, and DIY repair setups. It is an..

Restore the performance of your Strong 204 rotary handpiece with this precision-engineered armature. Designed to fit models 102, 102L, 105L, and 106L, this replacement part ensures smooth rotation, consistent torque, and extended tool life.Key Features:Compatible with Strong 204 handpiece models: 1..

The 3S BMS 20A Protection Board is designed for 3‑cell (3S) Li‑ion/Li‑Po battery packs with a nominal voltage of 11.1V and a charging voltage of 12.6V. It provides overcharge, over‑discharge, overcurrent, and short‑circuit protection, ensuring safe and reliable operation of battery packs used in dri..

The 3S BMS 40A Protection Board is designed for 3‑cell (3S) Li‑ion/Li‑Po battery packs with a nominal voltage of 11.1V and a charging voltage of 12.6V. It provides overcharge, over‑discharge, overcurrent, and short‑circuit protection, ensuring safe and reliable operation of high‑capacity battery pac..