-30%
Brand: TECHDELIVERS
Model: TD-L293M.N
L293D Motor Driver module is compatible with ESP12E Dev Kit and NodeMCU CP2102. This shield board is driven by the power full-bridge chip L293DD which can directly drive 2-channels DC motors or one-channel stepper motor.In this motor shield board, the IO port of ESP-12E Dev Kit is used as the ..
₹139.8 ₹200.0
-45%
Brand: TECHDELIVERS
Model: TD-L293M.S
Motor Driver – L293D Driver Module is a medium power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L293 motor driver IC. It can drive 4 DC motors on and off, or drive 2 DC motors with directional and speed control
The driver greatly simplifies and increases th..
₹84.0 ₹153.0
-33%
Brand: TECHDELIVERS
Model: TD-L293M.B
L293D Motor Driver Shield For Arduino UNO
Description:
This is a motor shield for an Arduino Uno that makes it easy for your Arduino to control various types of motors! All you need to do is attach this to your Uno, run wires from your motors to the respective terminal blocks, and supply some exte..
₹169.0 ₹253.0
-51%
Brand: TECHDELIVERS
Model: TD-L298M
Arduino and most of the other microcontroller boards works on 5V DC power supply and the maximum current that can be drawn from Arduino ATMEGA328P pins is just 40mA. To control large 12V brushed DC motors you need some kind of motor driver. The L298N Dual H-Bridge Motor Driver is a great value and c..
₹122.9 ₹253.0
-45%
Brand: TECHDELIVERS
Model: TD-LASERTx(M)
Features:
Voltage: 3.0 V – 5 VDriver: APC circuitLine length: about 135 mmTransmit power: 58mWOperating Current: 40mAOperating Current: 40mAOperating temperature: -36◦C ~ 65◦CShell Material: Brass
Working life: more than 2000 hours
NOTE: Do not connect to voltage higher than 5V DC as it will da..
₹42.0 ₹76.0
-81%
Brand: TECHDELIVERS
Model: TD-LASERTx(S)
Features:
Spot mode: dot facula, continuous output
Laser wavelength: 650nm (Red)
Copper Head Diameter: 6mm
Light power: <5mW
Supply Voltage: 4.5V DC
Operating Current: <40mA
Operating temperature: -36'C ~ 65'C
Power lead length: 75mm
Shell Material: Brass
Working life: more than 2000 h..
₹21.0 ₹109.0
-55%
Brand: TECHDELIVERS
Model: TD-LASERRx
This Laser Non-modulator Tub Sensor Receiving Module Laser output High Level is a sensor for Raspberry Pi and Arduino to receive the laser output and decode it digital data. At Input, the module Receive laser signal when output high level; Does not receive laser signal when output low level. On dete..
₹76.0 ₹169.0
-33%
Brand: TECHDELIVERS
Model: TD-LCD162G
16x2 LCD display is an alphanumeric display. It is based on the HD44780 display controller, and ready to interface with most micro-controllers.It works on 5V and has a Green Backlight which can be switched on and off as desired. The contrast of the screen can also be controlled by varying the voltag..
₹110.2 ₹165.0
-36%
Brand: TECHDELIVERS
Model: TD-LCD162B
If you want to add some visual output to your Arduino projects, you’ll need a display. If you need only a little to display, the LCD 16×2 Parallel LCD Display is a quite good solution. This is a genuine JHD Display as there are many fake JHD Displays in the Market.This is a great blue backlight LCD ..
₹118.6 ₹185.0
-40%
Brand: TECHDELIVERS
Model: TD-LCD162(B)SMH
LCD 16X2 Alphanumeric Display (BLUE Backlight) - Presoldered Male Header
Ready to use on Breadboard projects.16x2 LCD display is an alphanumeric display. It is based on the HD44780 display controller and ready to interface with most micro-controllers.
It works on 5V and has a BLUE Backlit whic..
₹152.5 ₹253.0
-43%
Brand: TECHDELIVERS
Model: TD-LCD162(G)SMH
LCD 16X2 Alphanumeric Display (Green Backlight) - Presoldered Male Header
Ready to use on Breadboard projects.16x2 LCD display is an alphanumeric display. It is based on the HD44780 display controller, and ready to interface with most microcontrollers.
It works on 5V and has a Green Backlight ..
₹144.1 ₹253.0
-60%
Brand: TECHDELIVERS
Model: TD-LCD162(B)SI2C
This is LCD 1602 Parallel LCD Display that provides a simple and cost-effective solution for adding a 16×2 White on Liquid Crystal Display into your project. The display is 16 character by 2 line display has a very clear and high contrast white text upon a blue background/backlight.This is great blu..
₹169.5 ₹423.0