Search Criteria
Products meeting the search criteria
-50%
Brand: TECHDELIVERS
Model: TD-FAN1.5
A brush-less cooling fan, also known as a DC brush-less fan, is a type of fan used for cooling electronic components, machinery, or other heat-generating devices. Unlike traditional fans with brushes and commutators, brush-less fans use electronic circuitry to control the rotation of the fan blades...
₹64.9 ₹128.6
Ex Tax:₹55.0
-49%
Out Of Stock
Brand: TECHDELIVERS
Model: TD-FAN2
A brush-less cooling fan, also known
as a DC brush-less fan, is a type of fan used for cooling electronic
components, machinery, or other heat-generating devices. Unlike
traditional fans with brushes and commutators, brush-less fans use
electronic circuitry to control the rotation of the fan..
₹75.5 ₹148.7
Ex Tax:₹64.0
-33%
Brand: TECHDELIVERS
Model: TD-FAN3
A brush-less cooling fan, also known
as a DC brush-less fan, is a type of fan used for cooling electronic
components, machinery, or other heat-generating devices. Unlike
traditional fans with brushes and commutators, brush-less fans use
electronic circuitry to control the rotation of the fan..
₹99.1 ₹148.7
Ex Tax:₹84.0
-57%
Brand: TECHDELIVERS
Model: TD-BAT4V1A
4.0Volt, 1Ah, Sealed Lead Acid Rechargeable Battery High Quality 100% new battery.
Technical Specifications:
Strong ABS body - Do not drop the battery.
DC 4.0 Volts, Lead Acid Sealed Maintenance Free Battery.
Dimensions (a..
₹55.5 ₹128.6
Ex Tax:₹47.0
-33%
Brand: Arduino
Model: TD-ALILY
The LilyPad Arduino is a microcontroller board designed for wearable and e-textiles. It can be sewn to fabric and similarly mounted power supplies, sensors and actuators with conductive thread. The board is based on the ATmega328. The LilyPad Arduino can be programmed with the Arduino software. The ..
₹398.8 ₹599.4
Ex Tax:₹338.0
-35%
Brand: Arduino
Model: TD-AUNODIP
This UNO R3 Board is compatible with Arduino and is based on Atmega328. The Uno R3 can be powered via a USB connection or with an external power supply. The Uno R3 has a number of facilities for communicating with a computer, another Arduino, or other microcontrollers. The ATmega328 provides UART TT..
₹608.9 ₹942.8
Ex Tax:₹516.0
Brand: Atmel
Model: TD-AT32A
Atmega32A - PU - 40Pins 32kb 8-bit Microcontroller
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 32KB of programmable flash memory, 2KB SRAM, 1KB EEPROM, an 8-channel 10-bit A/D converter, and a JTAG interface for on-chip debugging. The device supp..
₹384.7
Ex Tax:₹326.0
-13%
Brand: Atmel
Model: TD-AT8L
ATmega8A - 8-bit Microcontroller with 8K Bytes Flash - 28Pin
The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 8KB ISP flash memory with read-while-write capabilities, 512B EEPROM, 1KB SRAM, 23 general purpose I/O lines, 32 general purpose working registe..
₹199.4 ₹228.9
Ex Tax:₹169.0
Brand: Atmel
Model: TD-AT8ASMD
ATmega8A - 8-bit Microcontroller with 8K Bytes Flash - 28PinThe SMD TQFP package type ATMEGA 8 is an 8 bit microcontroller with 32 pin used in vast area.Features:
131 powerful instructions – most single clock cycle execution
32 × 8 general purpose working registers
8 Kbytes of in-system ..
₹234.8
Ex Tax:₹199.0
-60%
Brand: TECHDELIVERS
Model: TD-DPUMP
DE-SOLDERING is the process of removing soldered components from a circuit made on PCB. De-soldering pump along with the soldering iron is used for this purpose. A de-soldering pump also known as solder sucker is a small mechanical device which sucks the liquid/molten solder from the joint where the..
₹80.2 ₹199.4
Ex Tax:₹68.0
-58%
Brand: TECHDELIVERS
Model: TD-FeCl3(200g)
In Electronics, PCB Design is an essential part but ordering a PCB
and getting it on time is a difficult one especially for rapid
prototyping purposes. Here comes the Ferric Chloride handy as it is
useful to make hand-made PCB in no time.This Ferric Chloride is
an essential industry grade ch..
₹125.0 ₹298.5
Ex Tax:₹105.9
-33%
Brand: TECHDELIVERS
Model: TD-FeCl3(500g)
In Electronics, PCB Design is an essential part but ordering a PCB and getting it on time is a difficult one especially for rapid prototyping purposes. Here comes the Ferric Chloride handy as it is useful to make hand-made PCB in no time.This Ferric Chloride is an essential industry grade chemical t..
₹200.0 ₹298.5
Ex Tax:₹169.5