Use this high power 5 mm IR LED Transmitter and Receiver pair to build wireless remotes for appliances, distance sensors, object sensors, colour sensors, line sensors, distance sensors, etc.Can be directly connect to a micro-controller, Arduino or Raspberry Pi with only a few current limiting resist..
Relay SPDT 5V PCB mount
Features:
Current Contacts
7A 250VAC10A 125VAC10A 30VAC
Easy to use mounts on PCB
Compact Size
Economically Priced
*Image shown is a representation only, color may vary depending on stock. ..
7-segment display is a type of
electronic display that consists of seven individual segments arranged
in the shape of a figure-eight. Each segment can be independently
controlled to display numerical digits and some basic alphanumeric
characters. It is commonly used for displaying numbers i..
7-segment display is a type of electronic display that consists of seven individual segments arranged in the shape of a figure-eight. Each segment can be independently controlled to display numerical digits and some basic alphanumeric characters. It is commonly used for displaying numbers in variou..
You can use this A88 Metal detector non-contact metal induction detection module as a metal detector. When it approaches any metal, it makes a sound.This is a module specifically designed to detect metal. The module operates by inducing currents in metal objects and responding when it occurs. A nice..
The Heart Rate Monitor Kit with AD8232 ECG sensor module Kit For Arduino is a cost-effective board use to measure the electrical activity of the heart. This electrical activity can be chart as an ECG or Electrocardiogram and output as an analog reading.The ECG Module AD8232 Heart ECG Monitoring Sens..
The ADXL335 is a small, thin, low-power, complete 3-axis accelerometer with signal conditioned voltage outputs. The ADXL335 Module 3-axis Analog Output Accelerometer measures acceleration with a minimum full-scale range of ±3 g.It can measure the static acceleration of gravity in tilt-sensing applic..
ADXL345 Triple Axis Accelerometer Board is a small, thin, low power, 3-axis accelerometer with high resolution (13-bit) measurement at up to ±16g. Digital output data is format as 16-bit twos complement and is accessible through either an SPI (3- or 4-wire) or I2C digital interface.The ADXL345&..
The
Analog pH Sensor Kit is specially designed for Arduino controllers and
has a built-in simple, convenient, and practical connection and
features. It has an LED that works as the Power Indicator, a BNC
connector, and a PH2.0 sensor interface. To use it, just connect the pH
sensor with the BNC..
This TP4056 1A Li-ion lithium Battery Charging Module With Current Protection – Type C is a tiny module, perfect for charging single cell 3.7V 1 Ah or higher lithium-ion (Li-Ion) cells such as 16550s that don’t have their own protection circuit. Based on the TP4056 charger IC and DW01 battery protec..
BMP180 Digital Barometric Sensor Module compatible with Arduino will Measure the absolute pressure of the environment using a digital barometer such as this has some interesting applications.By converting the pressure measured into altitude, you have a reliable sensor for determining the height of y..
BMP280 Barometric Pressure and Altitude Sensor I2C/SPI Module is a cheapest and tiny Atmospheric Sensor Breakout to measure barometric pressure, and temperature readings all without taking up too much space. Basically, anything you need to know about atmospheric conditions you can find out from this..