-44%
Brand: TECHDELIVERS
Model: TD-RB1C5V(t)
This is 1 Channel 5V Relay Board Module For Arduino PIC AVR DSP ARM. A wide range of microcontrollers such as Arduino, AVR, PIC, ARM and so on can control it.Each one needs 15mA - 20mA driver current and Equipped with high current relay: DC 5V / 10A, AC 250V / 10AStandard interface that can be compa..
₹55.5 ₹99.1
Ex Tax:₹47.0
-29%
Out Of Stock
Brand: TECHDELIVERS
Model: TD-RB1C5V(o)
This single channel Relay Module operates at 5V TTL signal and is perfect for common Arduino/Raspberry Pi control applications. This board has one (1) on-board relay which can switch up to 10Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up the board ver..
₹88.5 ₹125.1
Ex Tax:₹75.0
-20%
Brand: TECHDELIVERS
Model: TD-RB2C5V(o)
Description:
This is a 2 Channel isolated 5V 10A relay
module Optocoupler for Arduino PIC ARM. It can be used to control
various appliances and other types of equipment with a large current. It
can be controlled directly with 3.3V or 5V logic signals from a
microcontroller (Arduino, 8051, AVR, ..
₹119.2 ₹148.7
Ex Tax:₹101.0
-33%
Brand: TECHDELIVERS
Model: TD-RB4C5V(o)
It is a 4 Channel Isolated 5V 10A Relay Module, A wide range of
microcontrollers such as Arduino, AVR, PIC, ARM and so on can control
it. It is also able to control various appliances and other types of
equipment with a large current.Relay output maximum
contact is AC250V 10A and DC30V 10A...
₹199.4 ₹298.5
Ex Tax:₹169.0
-52%
Brand: TECHDELIVERS
Model: TD-CNCA49
The A4988 driver Stepper Motor Driver is a complete micro-stepping motor driver with built-in converter, easy to operate. It operates from 8 V to 35 V and can deliver up to approximately 1 A per phase without a heat sink or forced air flow (it is rated for 2 A per coil with sufficient additional coo..
₹109.7 ₹228.9
Ex Tax:₹93.0
Brand: TECHDELIVERS
Model: TD-CNCV3
CNC shield v3 engraving machine 3D Printer + 4pcs A4988 driver expansion board
Engraver CNC Shield Board
Version:3.0
Color:Red
Size(L*W*H):68 x 53 x 18 mm
Voltage:DC 12~36 V (At the moment only the DRV8825 drivers can
Handle up to 36V so please consider the operation voltage when powering the boa..
₹798.9
Ex Tax:₹677.0
Out Of Stock
Brand: TECHDELIVERS
Model: TD-RB8C12V
Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has eight (8) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals of higher quali..
₹298.5
Ex Tax:₹253.0
Out Of Stock
Brand: TECHDELIVERS
Model: TD-RB4C12V
Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has four (4) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiri..
₹180.5
Ex Tax:₹153.0
Brand: TECHDELIVERS
Model: TD-RB4C6V
Relay board module is used for controlling higher current loads from your microcontroller development board, PC parallel port or Arduino Uno. This board has four (4) on-board relay which can switch up to 7Amps. Relays terminals (C, NC, NO) are accessible through screw terminals which makes wiring up..
₹199.4
Ex Tax:₹169.0
-45%
Brand: TECHDELIVERS
Model: TD-L293M.S
Motor Driver – L293D Driver Module is a medium power motor driver perfect for driving DC Motors and Stepper Motors. It uses the popular L293 motor driver IC. It can drive 4 DC motors on and off, or drive 2 DC motors with directional and speed control
The driver greatly simplifies and increases th..
₹99.1 ₹180.5
Ex Tax:₹84.0
-33%
Brand: TECHDELIVERS
Model: TD-L293M.B
L293D Motor Driver Shield For Arduino UNO
Description:
This is a motor shield for an Arduino Uno that makes it easy for your Arduino to control various types of motors! All you need to do is attach this to your Uno, run wires from your motors to the respective terminal blocks, and supply some exte..
₹199.4 ₹298.5
Ex Tax:₹169.0
-51%
Brand: TECHDELIVERS
Model: TD-L298M
Arduino and most of the other microcontroller boards works on 5V DC power supply and the maximum current that can be drawn from Arduino ATMEGA328P pins is just 40mA. To control large 12V brushed DC motors you need some kind of motor driver. The L298N Dual H-Bridge Motor Driver is a great value and c..
₹145.1 ₹298.5
Ex Tax:₹123.0