Your Cart

Op-Amp IC's

Model: TD-OP3140
  CA3140 Bi-CMOS Operational-Amp (CA3140E Op-Amp)   Features: MOSFET Input Stage Very High Input Impedance Very Low Input Current Wide Common Mode Input Voltage Range - Can be Swung 0.5V Below Negative Supply Voltage Rail Output Swing Complements Input Common Mode Range Directly R..
₹ 43.00
Model: TD-OP398
  LF398 - Monolithic Sample-and-Hold Circuits General Description: The LF198/LF298/LF398 are monolithic sample-and-hold circuits which utilize BI-FET technology to obtain ultra-high dc accuracy with fast acquisition of signal and low droop rate. Operating as a unity gain follo..
₹ 83.00
Model: TD-OP311
  LM311 - Voltage Comparator General Description:   The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15..
₹ 20.00
Model: TD-OP324
  LM324 Low Power Quad Op-Amp   General Description:   The LM324 series consists of four independent, high gain,internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation..
₹ 15.00
Model: TD-OP339
  LM339 - Low Power Quad Op-Amp   Advantages: High precision comparators Reduced VOS drift over temperature Eliminates need for dual supplies Allows sensing near GND Compatible with all forms of logic Power draisuitable for battery operation Features: Four Independent Comparators..
₹ 20.00
Model: TD-OP358
Low Power Dual Operational Amplifiers The LM358 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also..
₹ 15.00
Model: TD-OP386
  LM386 - Low Voltage Power Amplifier   Description:   The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 a..
₹ 15.00
Model: TD-OP393
  LM393 - Low Power Low Offset Voltage Dual Comparators Features: Wide Supply Voltage Range: 2.0V to 36V  Single or Dual Supplies: ±1.0V to ±18V  Very Low Supply Current Drain (0.4 mA) Low Input Biasing Current: 25 nA  Low Input Offset Current: ±5 nA  Maximum Offset v..
₹ 15.00
Model: TD-OP741
  LM741 Operational Amplifier   Description:   The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439 and 748 in most applications. ..
₹ 20.00
Model: TD-OP07
  OP07 - Ultralow Offset Voltage Operational Amplifier Features: Low VOS: 75 μV maximum  Low VOS drift: 1.3 μV/°C maximum  Ultrastable vs. time: 1.5 μV per month maximum  Low noise: 0.6 μV p-p maximum  Wide input voltage range: ±14 V typical  Wide supply voltage ran..
₹ 22.00
Model: TD-OP072
  TL072 Low Noise JFET Dual Op-Amp   Features: Low Power Consumption Wide Common-Mode and Differential Voltage Ranges Low Input Bias and Offset Currents Output Short-Circuit Protection Low Total Harmonic Distortion 0.003% Typ Low Noise Vn = 18 nV/√Hz Typ at f = 1 kHz High Input Im..
₹ 20.00
Showing 1 to 11 of 11 (1 Pages)
We use cookies and other similar technologies to improve your browsing experience and the functionality of our site. Privacy Policy.