Brand: TECHDELIVERS
Model: TD-CLAMPB
This mounting clamp can be used to mount BO type plastic gear motor onto any chasis or PCB. Few screws are required to attach BO motor to this bracket and another pair of screws are needed to mount this bracket on chasis or PCB.
Please note that clamping screws/ nuts/ bolts are NOT included with th..
₹9.4
Ex Tax:₹8.0
Brand: TECHDELIVERS
Model: TD-CLAMPG
This mounting clamp can be used to mount Center shaft type plastic DC gearhead motors onto any chasis or PCB. Few pair of screws are needed to mount this bracket on chasis or PCB.
Please note that clamping screws/ nuts/ bolts are NOT included with this product. For screws/ nuts/ bolts see "R..
₹15.3
Ex Tax:₹13.0
Brand: TECHDELIVERS
Model: TD-CLAMPJ
Clamps are the fundamental chassis parts. You can fix your motors with these clamps according to your own wish; based on the type and size of the base you decide to make of the bot.
Please note that clamping screws/ nuts/ bolts are NOT included with this product. For screws see "Related Products"
..
₹24.8
Ex Tax:₹21.0
New
Brand: TECHDELIVERS
Model: TD-WASHER4
M6 Flat WasherWasher is a thin plate (typically disk-shaped) with a hole (typically
in the middle) that is normally used to distribute the load of a
threaded fastener, such as a screw or nut.Washer (Metric Washer)
also called as shim. Washers usually have an outer diameter (OD) about
twice t..
₹3.0
Ex Tax:₹2.5
New
Brand: TECHDELIVERS
Model: TD-WASHER3
M6 Flat WasherWasher is a thin plate (typically disk-shaped) with a hole (typically
in the middle) that is normally used to distribute the load of a
threaded fastener, such as a screw or nut.Washer (Metric Washer)
also called as shim. Washers usually have an outer diameter (OD) about
twice t..
₹3.0
Ex Tax:₹2.5
New
Brand: TECHDELIVERS
Model: TD-WASHER1
M6 Flat WasherWasher is a thin plate (typically disk-shaped) with a hole (typically
in the middle) that is normally used to distribute the load of a
threaded fastener, such as a screw or nut.Washer (Metric Washer)
also called as shim. Washers usually have an outer diameter (OD) about
twice t..
₹1.0
Ex Tax:₹0.9
New
Brand: TECHDELIVERS
Model: TD-WASHER2
M6 Flat WasherWasher is a thin plate (typically disk-shaped) with a hole (typically
in the middle) that is normally used to distribute the load of a
threaded fastener, such as a screw or nut.Washer (Metric Washer)
also called as shim. Washers usually have an outer diameter (OD) about
twice t..
₹1.0
Ex Tax:₹0.9
Brand: TECHDELIVERS
Model: TD-NUTB6
Machine Screw M3 for mounting Jhonson Motor
Generally used for attaching robotics like Johnson Side Shaft Motor fittings or any user dependent.
Specifications:
Size : 6mm (Length)
Thread Size : M3
Metal
*Image shown is a representation only...
₹4.0
Ex Tax:₹3.4
-45%
Brand: TECHDELIVERS
Model: TD-ARMGRIP
Metal mechanical Arm Gripper for MG995 SG5010 servo kit is very useful to make a robotic arm which is used in many applications like move a material from one place to another place (Weight not exceed more than 500 gms).Features:The plank kit is very light Compatible with MG995 ServoMount..
₹499.1 ₹900.3
Ex Tax:₹423.0
Brand: TECHDELIVERS
Model: TD-NUTB1
Nut with Bolt - 2mmx15mm(approx)
Generally used for attaching robotics like motor fittings or any user dependent.
Specifications:
Size : 1/2inch (Length)
Diameter : 1/8inch
Metal
Contains: One piece Nut & One piece Bolt
*Image shown is a representation only...
₹3.0
Ex Tax:₹2.5
Brand: TECHDELIVERS
Model: TD-NUTB2
Nut with Bolt - 2mmx50mm(approx)
Generally used for robots or any user specific applicaion.
Specifications:
Size : 2inch (Length)
Diameter : 1/8inch
Metal
Contains: One piece Nut & One piece Bolt
*Image shown is a representation only...
₹5.0
Ex Tax:₹4.2
Brand: TECHDELIVERS
Model: TD-NUTB3
Nut with Bolt - 2mmx75mm(approx)
Commonly used for robotics or any other user specific application.
Specifications:
Size : 3inch (Length)
Diameter : 1/8inch
Metal
Contains: One piece Nut & One piece Bolt
*Image shown is a representation only...
₹7.0
Ex Tax:₹5.9