HD14069 - Hex Inverter replacement CD4069
Category
Integrated Circuits (ICs)
Name
HD14069
Series
4000
Mounting Type
Through Hole
No. of Pins
14 (DIP)
Features:
Quiesent Current = 0.5nA typ/pkg@5v
Noise Immunity = 45% of VDD typ
Capable of Driving One Low-power Schot..
HT12D - Decoder 18pin DIP + HT12E - Encoder 18pin DIP PAIR
Features:
Operating voltage: 2.4V~12V
Low power and high noise immunity CMOS technology
Low standby current
Capable of decoding 12 bits of information
Pair with Holteks 212 series of encoders
Binary addr..
L293D - H-Bridge Motor Driver
PUSH-PULL FOUR CHANNEL DRIVER WITH DIODES
The L293D is assembled in a 16 lead plastic package which has 4 center pins connected together and used for heatsinking.
The Device is a monolithic integrated high voltage, high current four channel ..
L298N High Current Dual H-Bridge Motor Driver IC - Original ST Electronics IC
The L298N by ST Microelectronics is a 15 lead high-voltage, high-current dual full-bridge driver designed to accept TTL logic levels such as those from a PIC, BASIC Stamp, or similar microcontroller and drive indu..
LF398 - Monolithic Sample-and-Hold Circuits
General Description:
The LF198/LF298/LF398 are monolithic sample-and-hold circuits which utilize BI-FET technology to obtain ultra-high dc accuracy with fast acquisition of signal and low droop rate. Operating as a unity gain follo..
LM311 - Voltage Comparator
General Description:
The LM111, LM211 and LM311 are voltage comparators that have input currents nearly a thousand times lower than devices like the LM106 or LM710. They are also designed to operate over a wider range of supply voltages: from standard ±15..
The LM317 is an adjustable 3-terminal positive voltage.They are exceptionally easy to use and require only two external resistors to set the output voltage. Further, both line and load regulation are better than standard fixed regulators
Features:Output Voltage Tolerance 1%
Line Regulation 0.01%..
The LM324 series consists of four independent, high gain,internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also possible and the low power supply current..
Low Power Dual Operational Amplifiers
The LM358 series consists of two independent, high gain, internally frequency compensated operational amplifiers which were designed specifically to operate from a single power supply over a wide range of voltages. Operation from split power supplies is also..
LM386 - Low Voltage Power Amplifier
Description:
The LM386 is a power amplifier designed for use in low voltage consumer applications. The gain is internally set to 20 to keep external part count low, but the addition of an external resistor and capacitor between pins 1 a..
LM393 - Low Power Low Offset Voltage Dual Comparators
Features:
Wide Supply
Voltage Range: 2.0V to 36V
Single or Dual Supplies: ±1.0V to ±18V
Very Low Supply Current Drain (0.4 mA)
Low Input Biasing Current: 25 nA
Low Input Offset Current: ±5 nA
Maximum Offset v..
The LM741 series are general purpose operational amplifiers which feature improved performance over industry standards like the LM709. They are direct, plug-in replacements for the 709C, LM201, MC1439 and 748 in most applications.
The amplifiers offer many features which make their application ne..