Perforated Copper Stipboard - Single Sided - 6inch* 4inch - Good Quality

General purpose board primarily used for testing circuits, these are average quality boards. These are single sided only.

Overall, perforated copper strip-board provides a flexible and cost-effective solution for prototyping and constructing electronic circuits without the need for custom PCB manufacturing.
Strip-board is available in various sizes and configurations, allowing for different circuit sizes and complexity levels. It can be cut to specific dimensions if needed.

When working with strip-board, it's important to plan the circuit layout carefully to ensure proper connections and avoid crossing tracks. The holes are typically arranged in rows and columns, allowing components to be aligned in a grid-like fashion. Cutting and soldering bridges on the copper tracks can be done to create desired connections.

The advantage of using strip-board is that it allows for rapid prototyping and easy modification of circuits. Components can be placed and soldered directly onto the board without the need for designing and manufacturing a custom PCB. This makes it a popular choice for hobbyists, students, and small-scale projects.

The term "single-sided" refers to the presence of copper on only one side of the board. The other side is typically plain and does not have any copper traces. This limits the routing options compared to double-sided or multi-layer PCB but is sufficient for many simple to moderate complexity circuits.

The copper pads or strips on the strip-board serve as the conductive pathways for components and connections. These copper tracks can be cut and bridged using wires or component leads to create the desired circuit layout. The holes allow components to be inserted and soldered onto the board, forming electrical connections.

Perforated copper strip-board, also known as single-sided zero PCB (Printed Circuit Board), is a type of prototyping board used for constructing electronic circuits. It consists of a flat board with a grid of evenly spaced holes, each of which is surrounded by a copper pad or strip.

Specifications:

• Drill hole spacing of 2.5mm
• Drill hole diameter of 0.8mm
• Size- 4inch*6inch
• Single sided Copper layer
• Thickness- 1 mm (approx.) 

* Image shown is a representation only.