A 433MHz RF wireless receiver and transmitter module is a pair of electronic components that enable wireless communication between devices using radio frequencies in the 433MHz frequency band. Here's a breakdown of these modules:RF Wireless Receiver Module:
The RF wireless receiver module is design..
Use this high power 5 mm IR LED Transmitter and Receiver pair to build wireless remotes for appliances, distance sensors, object sensors, colour sensors, line sensors, distance sensors, etc.Can be directly connect to a micro-controller, Arduino or Raspberry Pi with only a few current limiting resist..
The
Analog pH Sensor Kit is specially designed for Arduino controllers and
has a built-in simple, convenient, and practical connection and
features. It has an LED that works as the Power Indicator, a BNC
connector, and a PH2.0 sensor interface. To use it, just connect the pH
sensor with the BNC..
The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus th..
The DS18B20 digital thermometer provides 9-bit to 12-bit Celsius temperature measurements and has an alarm function with nonvolatile user-programmable upper and lower trigger points. The DS18B20 communicates over a 1-Wire bus th..
HX711 features dual-channel 24 Bit Precision A/D Weight Pressure Sensor Load Cell Amplifier which is available in a small breakout board. The board has pinouts for the microcontroller and the Load cell in two different directions for the ease of interfacing. It can be interfaced with any micro..
The eye–blink sensor works by illuminating the eye and eyelid area with infrared light, then monitoring the changes in the reflected light using a photo-transistor and differentiator circuit. The exact functionality depends greatly on the positioning and aiming of the emitter and..
Melexis' MLX90614ESF is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614’s high accuracy and resolution. It has a huge number of applications including body temperature measurment and movement detection.Th..
The IR Receiver Photodiode Black - 5mm 940nm is a specific type of optical sensor that is designed to receive infrared (IR) light signals at a wavelength of 940 nanometers (nm). It is commonly used in various applications involving IR communication, remote control systems, and proximity sensing.Here..
This is a multipurpose infrared sensor which can be used for obstacle sensing, fire detection, line sensing, etc and also as an encoder sensor. The sensor provides a digital output. The sensor outputs a logic one(+5V) at the digital output when an object is placed in front of the sensor and a logic ..
The IR Transmitter Photodiode Transparent - 5mm 940nm is a type of photodiode that emits infrared (IR) light at a wavelength of 940 nanometers (nm). It is designed to convert electrical signals into IR light output for applications such as IR communication, remote control systems, and proximity sens..
Infrared Thermopile Sensor can measure the temperature without contact by detecting the infrared energy of an object. And the higher the temperature, the more infrared energy is produced.Thermopile sensing elements consist of small thermocouples on silicon chips that absorb energy and produce output..