Menu
Menu
Your Cart

ATmega32A - 8-bit Microcontroller with 32K Bytes Flash PDIP-40

ATmega32A - 8-bit Microcontroller with 32K Bytes Flash PDIP-40
ATmega32A - 8-bit Microcontroller with 32K Bytes Flash PDIP-40
Super-fast Air Shipping Available
Cash On Delivery available on order total above ₹500
  • Stock: In Stock
  • Brand: Atmel
  • Model: TD-AT32A
  • Weight: 15.00g
190 samples sold
Product Views: 4686
₹326.0

 

Atmega32A - PU - 40Pins 32kb 8-bit Microcontroller

The high-performance, low-power Atmel 8-bit AVR RISC-based microcontroller combines 32KB of programmable flash memory, 2KB SRAM, 1KB EEPROM, an 8-channel 10-bit A/D converter, and a JTAG interface for on-chip debugging. The device supports throughput of 16 MIPS at 16 MHz and operates between 4.5-5.5 volts. By executing instructions in a single clock cycle, the device achieves throughputs approaching 1 MIPS per MHz, balancing power consumption and processing speed.

Features
  • High-performance, Low-power AVR 8-bit Microcontroller
  • Advanced RISC Architecture
    • 131 Powerful Instructions - Most Single Clock Cycle Execution
    • 32 x 8 General Purpose Working Registers
    • Up to 16 MIPS Throughput at 16MHz
    • Fully Static Operation
    • On-chip 2-cycle Multiplier
  • Nonvolatile Program and Data Memories
    • 32k Bytes of In-System Self-Programmable Flash
    • Optional Boot Code Section with Independent Lock Bits
    • 2K Bytes EEPROM
    • Programming Lock for Software Security
  • Peripheral Features
    • On-chip Analog Comparator
    • Programmable Watchdog Timer with Seperate On-chip Oscillator
    • Master/Slave SPI Serial Interface
    • Two 8-bit Timer/Counters with Separate Prescalar, Compare 
    • One 16-bit TImer/Counter with Seperate Prescaler, Compare and Capture mode
    • Real TIme Counter with Seperate Oscillator
    • Six PWM Channels
    • 8-channel, 10-bit ADC
    • Byte-oriented Two-wire Serial Interface
    • Programmable Serial USART
  • Special Mircocontroller Features
    • Power-on Reset and Programmable Brown-out Detection
    • Internal Calibrated RC Oscillator
    • External and Internal Interrupt Sources
    • Six Sleep Modes: Idle, ADC Noise Reduction, Power-save, Power-down, Standby, and Extended Standby
  • I/O and Packages
    • 32 Programmable I/O Lines
    • 40-pin PDIP, 44-lead TQFP, and 44-pad MLF
  • Operating Voltages
    • 4.5 - 5.5V for ATmega32
  • Speed Grades
    • 0-16 MHz for ATmega32
  • Power Consumption at 1 Mhz, 1.8V, 25 °C
    • Active: 0.6mA
    • Power-down Mode: <1µA

*Image shown is a representation only.

Write a review

Note: HTML is not translated!
Rating
Bad Good
Captcha